24-hour service hotline +86 13793544858
Home product Magnetic Separator

Magnetic Separator

[Introduction]: A wet permanent magnetic separator for separating strong magnetic minerals

[Capacity]: 24t/h-240t/h

[Improvement]: Magnetic system materials adopt the NdFeB with high magnetic energy product and high coercivity, strong magnetic density and high affect depth; the surface of the cylinder is lined with Xinhai wear-resistant rubber.

Magnetic Separator

ADVANTAGES

Magnetic system is compounded of ferrite and permanent magnets, the average magnetic induction intensity of cylinder surface is 100~600mT;

The same cylinder can be equipped with three types of tank adapting to different dressing process;

Small floor space, good separation for magnetic minerals, reduce the load of next process.

PRODUCT STRUCTURE

structure-Magnetic-Separator

Permanent magnetic drum separators have 3 kinds including downstream type, counter flow type and semi- counter flow type according to the difference of base structures.

Downstream type permanent magnetic drum separator: slurry flows in the same direction with the drum.

Counter flow type permanent magnetic drum separator: slurry flows over against the drum, which create great conditions for cleaning of non magnetic ores. The non magnetic ores approach the clean surface of the drum and the magnetic ores can be absorbed in the strongest magnetic field.

Semi-counter flow type permanent magnetic drum separator: slurry is fed into the cavity from the bottom of the drum, and the magnetic ores fall into the concentrate tank after reaching a certain height, while the non magnetic ores will enter into tailings tank along with slurry in the opposite direction with drum.

TECHNICAL PARAMETERS

Model & Spec. CTBY1018 CTBY1024 CTBY1030 CTBY1218 CTBY1224 CTBY1230
Diameter of Cylinder (mm) 1000 1000 1000 1200 1200 1200
Length of Cylinder (mm) 1800 2400 3000 1800 2400 3000
Surface Magnetic Density (mt) 350~550 350~550 350~550 350~550 350~550 350~550
Rotating Speed of Cylinder (r/min) 23 23 23 20 20 20
Capacity of Dry Ore (t/h) 42 ~65 53 ~86 82~124 58 ~97 71~120 103~158
Feed Size (mm) 0~10 0~10 0~10 0~10 0~10 0~10
Slurry Density (%) 20 ~50 20 ~50 20 ~50 20 ~50 20 ~50 20 ~50
Motor Power (kW) 5.5 7.5 7.5 7.5 11 11
Total Weight (t) 5.2 6.4 7.1 6.7 7.2 8.9
Equipment Length (mm) 3160 3790 4460 3380 4190 4770
Equipment Width (mm) 2250 2250 2250 2460 2460 2460
Equipment Height (mm) 1750 1750 1750 2000 2000 2000

RELATED Solutions

RELATED PRODUCTS