[Introduction]: A slurry pump for conveying pulp with concentration below 65%.
[Improvement]: Slurry pump impeller and the casing are lined with Xinhai high wear-resistant rubber ensuring that the pump body is not subject to wear. In the same project, the service life of Xinhai slurry pump is 2 times longer than other metal pump life reaching the international top quality. The rubber liners wear index has reached 128%.
High efficiency, low energy consumption;
Smooth wet parts make operation more stable;
The wear resistance index is high, and the service life is more than 2-4 times longer than other wear-resistant materials;
Small specific gravity wet parts, convenient maintenance, low noise; reduce the number of repair personnel and the operational maintenance cost;
The lining of the rubber material has a small specific gravity, the lining is light, the speed of the impeller is increased, and the efficiency is increased by more than 30%.
The working principle of the wear-resistant slurry pump is to use the motor to drive the impeller to rotate to force the fluid to rotate, so that the impeller does work on the fluid along its moving direction, forcing the pressure potential and kinetic energy of the fluid to increase. Under the action of the inertial force of the fluid, The center flows to the edge of the impeller, and flows out of the impeller at a high speed, enters the press-out chamber, and is discharged through the outlet pipe.
The main components of wear-resistant slurry pump includes impeller, motor, sheath etc.
|Model & Spec.||Flow
|Rotating Speed (r/min)||Max. Rated Power (kW)||Max. Efficiency
|Overall Dimension (mm)|
|XPA 50/50||20 ~60||38||800~2400||22||51||200||156||725X482X491|
|XPA 100/100||60~160||50||600~1600||75||57||340||440||999 X 648 X 660|